含Ti3C2Tx MXene的聚酰亚胺/聚酰胺-酰亚胺/环氧树脂涂层的自润滑和抗腐蚀性能
Self-lubricating and anti-corrosion properties of polyimide/ polyamide-imide/epoxy resin coatings with Ti3C2Tx MXene
ES评分0
| DOI | https://doi.org/10.1016/j.triboint.2025.111279 |
| 刊名 |
|
| 年,卷(期) | 2025, 214(0) |
| 作者 |
|
| 作者单位 |
浙江省温州市高教园区温州大学机电学院C509 |
| 摘要 |
为提高发动机轴承在混有0.5 wt%酸的油液条件下的摩擦学性能和耐腐蚀性,制备了一种Ti3C2Tx增强的PI/PAI/EP(MX-PPE)复合涂层。通过摩擦试验、电化学分析和分子动力学模拟,研究了MX-PPE涂层的保护机制。结果表明,1 wt%的Ti3C2Tx使纯涂层的H/E比提高了14.3%。在油酸介质中,1% MX-PPE涂层的磨损率降低了65.6%。1% MX-PPE涂层提高了摩擦学性能和耐腐蚀性。MX-PPE涂层的多层结构在滑动磨损过程中促进了层间滑动。Ti3C2Tx的表面官能团与甲酸分子发生物理吸附,形成保护屏障,防止腐蚀介质渗透。
|
| Abstract |
To improve the tribological and corrosion resistance of engine bearing under oil mixed with 0.5 wt% acid conditions, a Ti3C2Tx -reinforced PI/PAI/EP (MX-PPE) composite coating was fabricated. The protection mechanisms of the MX-PPE coating were investigated through frictional tests, electrochemical analyses, and molecular dynamics simulations. Results reveal that 1 wt% Ti3C2Tx enhanced the H/E ratio of pure coating by 14.3 %. The wear rate of the 1 % MX-PPE coating in oil-acid media was reduced by 65.6 %. The 1 % MX-PPE coating improves the tribological and anti-corrosive properties. The multilayered structure of MX-PPE coating facilitates interlayer slippage during sliding wear. The surface functional groups of Ti3C2Tx have physical adsorption with formic acid molecules, and form a protective barrier that prevents corrosive medium penetration.
|
| 关键词 |
Ti3C2Tx MXene;聚合物涂层; 自润滑; 耐腐蚀;性 分子动力学模拟
|
| KeyWord |
Ti3C2Tx MXene; Polymer coating; Self-lubricating; Corrosion resistance; Molecular dynamics simulation
|
| 基金项目 | |
| 页码 | 1-20 |
[1] Svanberg M, Ellis J, Lundgren J, Land¨ alv I. Renewable methanol as a fuel for the shipping industry. Renew Sustain Energy Rev 2018;94:1217–28. https://doi.org/ 10.1016/j.rser.2018.06.058.
[2] Yang G, Xu L, Li D, Li N, Zhang G. Study on the lubrication mechanism of DiamondLike carbon coating in two formulated lubricants with two viscosity grades. J Mater Eng Perform 2022;31:6711–21. https://doi.org/10.1007/s11665-022-06708-5.
[3] Kaiser S, Kaiser MS. A comparative study of chemical and physical properties of copper and copper alloys affected by acidic, alkaline and saline environments. J Electrochem Sci Eng 2020;10:373–84. https://doi.org/10.5599/jese.877.